Good wall chasers

A wall chaser is a power tool for creating grooves in walls and floors from a variety of materials, including concrete. It is indispensable for the repair and construction of buildings. But in this case, only the best equipment, which has collected positive reviews and has successfully passed numerous tests, can not fail. We studied the offers of this market and selected 6 of the best chasing chasers from 50 options, including those with the ability to connect a vacuum cleaner.

Which company is better to choose a wall chaser

This rating offers an overview of models mainly from Russian manufacturers; there are also products from German and Japanese firms. Each of them has a good reputation and many positive reviews. Here are the companies we are talking about:

• Interskol - a Russian company that supplies the market with affordable power tools for repairs. Its chasing chasers assist in slitting for cable routing and piping. In 2024, there are 4 models in the company's assortment, and these are mainly budget options worth up to 10,000 rubles. They have sharp cutting discs, so that strobes are created quickly and efficiently. The devices walk on the surface with confidence and ease, leaving a minimum of waste.
• Bosch Is a German company with a wide range of power tools for home and professional use. With their help, you can create grooves both in thin drywall sheets and in concrete walls or brickwork. They have a high capacity, a patented dustproofing system and a low weight of about 5 kg.
• Bison Is a Russian company that provides a wide range of power tools, among which there are quite a few wall chasers. On average, they have a power of 1200-2600 watts and a disc rotating at a speed of 6000 to 11000 rpm. The tools of this company provide a cutting depth of up to 65 mm, depending on the model. The minimum noise level and operational safety make them good chasers.
• Fiolent - a plant for the production of power tools, which is created in workshops equipped with the latest equipment. For this, advanced technologies are used here and each stage is carefully controlled to exclude defects. Several "furrow makers" are offered under this trade mark with a good price-quality ratio. They are sold along with everything you need to get the job done. Some of them can be used as a concrete grinder.
• Makita Is a Japanese firm that has been manufacturing professional electrical tools since 1915. She always provides a 3-year warranty on her products. She has few wall chasers, their input power is on average 1800 W, and the number of revolutions can vary from 4100 to 7800 per minute.
• Caliber - the company offers a wide selection of power tools at affordable prices. She has in stock a series of wall chasers "Master", which includes two models with a capacity of 2600 W and 1500 W, respectively, with a cutting depth of 8 to 65 mm. They are used for cutting grooves in stone, brick, foam concrete, concrete. They are safe to use, since they have a soft start, there is a blocking of accidental start-up and a protective cover.

The best circular saws according to user reviews

Rating of the best wall chasers

When selecting tools for chipping, we considered both the younger and newer models on the market. We studied only those options that have a large number of positive reviews. Before including one or another instrument in the rating, the following parameters were carefully analyzed:

• Cutting depth, cutting width and diameter of the cutting disc;
• Materials with which the tool can work;
• Disk power and rotation speed;
• Equipment;
• Safety of use - equipped with protection against overload and accidental activation;
• Easy to replace components;
• Weight and dimensions;
• Noise level;
• No dust when working;
• Ability to connect a vacuum cleaner;
• Ease of control - smooth start, adjustable speed and cutting depth.

The best wall chasers

These tools can be used to create strobes in brick, stone, and any other masonry. They have sharp cutting discs and are versatile. Of all the applicants, only two of the best models were selected in terms of work quality and operational safety.

Interskol PD-125 / 1400E

This chaser was chosen from 5 applicants, having withstood the competition in terms of quality of creation of chases and versatility of work. The tool easily creates a groove in almost any type of masonry - brick, concrete, stone, and its depth can be adjusted up to 30 mm.

It has a sufficiently powerful 1400 watt motor which makes it quick and efficient to apply. Its strengths include quick replacement of accessories and the ability to connect a vacuum cleaner, which allows you to keep your workplace clean. The option to maintain a constant speed makes it easier to work with.

Advantages

• Dust removal efficiency;
• Application safety;
• Comfortable grip;
• Special key included;
• Lightweight at 4.78 kg.
• Disc that does not grind for a long time;
• It can rotate at 9500 rpm.

disadvantages

• Two rollers for moving the wall chaser go tight;
• Cutting from top to bottom is not very convenient.

13 good tile cutters according to customer reviews

Bosch GNF 20 CA

This is a good representative of premium chasing tools that have almost nothing to complain about. Our experiment showed that the tool is easy to use, and we attribute this to the Constant Electronic electronic stabilizer, which ensures a stable speed even under high loads.

Due to the low weight of 3.4 kg, the hand does not get tired when working with the Bosch GNF 20 CA. The ergonomic shape of the handle makes the use of the wall chaser comfortable even for a long time. Separately, it is worth noting a good package, the kit includes everything you need to create a strobe - a mounting flange, a wrench, a chisel, a nut.

Advantages

• Large range of groove width - from 3 to 23 mm;
• The minimum cutting depth is 1 mm, the maximum is 20 mm;
• Maintains constant speed;
• Reliable protection against accidental activation;
• Works at high speed - up to 9300 rpm;
• The cut is neat.

disadvantages

• High price.

Reviews show that the Bosch GNF 20 CA wall chaser is suitable for both home and professional use during renovations.

The best wall chasers with a vacuum cleaner connection

Such models are more expensive than ordinary ones, but they are more convenient, since they allow you to connect a vacuum cleaner and keep the workplace clean without much effort. After analyzing the characteristics of the models available on the market, studying the reviews about them and testing these tools, only two products were added to the rating.

Bison ZSH-30-1200 T

First of all, this model was included in the rating because of the optimal price-quality ratio. In her review, one cannot but mention reliable dust protection, which increases the service life of the tool and makes it easier to use. It is used to create recesses in aerated concrete, brick, lightweight concrete, for example, for laying pipes.But here you should not rely on the fact that they will be able to perform more complex work.

The powerful motor of the tool for chipping "Bison Shtroborez ZSh-30-1200 T" allows you to easily cut without overloading the product and losing speed. The immersion disc system, thanks to the wide, non-chafing handle, makes it more convenient to use. At the same time, you can hold it with both hands, which excludes the appearance of tremor even in the case of prolonged use of the chaser.

Advantages

• Two discs in a set with good sharpness;
• Provides cleanliness in the workplace;
• Two keys included - special and imbus;
• Can reach speeds of 11,000 rpm;
• Cuts to a depth of 3 cm;
• The original design of the brush holder, which excludes damage to the collector when it is completely worn out;
• Additional handle.

disadvantages

• No soft start;
• Constant speed is not maintained at high loads.

Having tested the concrete chaser with the Zubr ZSh-30-1200 T vacuum cleaner on our own experience, we can say that it is very functional - it works even with one disc, prevents the scatter of cut waste, has a smooth disc immersion system, which excludes sharp cuts.

Fiolent B1-30

This is a neat "furrow maker", providing high quality strobe execution. It has proven itself well due to a multi-stage system for adjusting the immersion depth of the disc, quick cleaning of the working space from dust thanks to an additionally connected vacuum cleaner and a soft start system that avoids sudden jerks at the start.

This tool, of course, cannot be called multifunctional, but a furrower can easily make grooves in the walls, for example, for arranging communications. When cornering and grinding, it is less efficient but still useful. His discs are very sharp, but if you need to replace them, it will not be difficult to do this due to the simple fixation of the spindle. Its characteristics are bright - a cutting depth of up to 30 mm allows you to work even with thick materials.

Advantages

• Official guarantee for 12 months;
• Two sets of discs;
• Swivel handle;
• Does not overheat due to reliable protection;
• Constant speed support;
• High quality protective cover.

disadvantages

• Short cord;
• Doesn't work well with a generator.

Reviews of the Fiolent B1-30 chipping tool show that it copes well with work on tiles and porcelain stoneware, with plaster partitions.

The best concrete chasers

Not all such power tools are free to cut concrete, and even if they can do it, it is with great difficulty, working slowly and ineffectively. We tried to select high-quality wall chasers that adequately fulfill their tasks. As a result, two models were included in the TOP.

Makita SG1251J

Of all the chasers in the ranking, this is the best in terms of efficiency and ergonomics. It has a rounded shape and compact size, so it is convenient to use. This process is facilitated by the two handles and the weight of 4.5 kg. The tool practically does not litter, as it cuts accurately, has a smooth disc movement. This option is appropriate when working at a great distance from the outlet, since it is equipped with a 5 m cable. Of course, its noise level is not low, 108 dB, but this is tolerable due to the high quality result.

This model is suitable even for those who do not have much experience in carrying out repairs. It has a cutting depth limiter up to 30 mm, which will not spoil the material. The tool is universal, since it can make grooves with a width of 6 to 30 mm, but it is a pity that the speed cannot be adjusted here, the maximum indicator is 10,000 disk rotations per minute with a power of 14,000 watts.

Advantages

• Ease of maintenance;
• Precise adjustment of the depth and width of the cut;
• Easy removal or installation of washers;
• Clearly working electronic stabilization system;
• Maneuverability;
• Ergonomic handle;
• The minimum amount of dust.

disadvantages

• High price;
• A bit noisy.

Caliber SHTBE-2600 / 230M

This is the best option among the tools for gouging the mid-price range. It has one of the widest cutting discs in the rating at 23 cm, allowing you to get the job done faster. The ability to adjust the cutting depth from 20 to 65 cm is also impressive here, which allows you to make high-quality grooves both in tiles and in bricks or concrete. But still, when the threshold of 40 cm is exceeded, the disc goes tighter and slower, you need to make some effort. To eliminate inconvenience, the manufacturer has provided two handles that can be held simultaneously.

During the production of the Caliber SHTBE-2600 / 230M model, special attention was paid to safety. There is a blocking of accidental switching, a soft start and a cutting depth limiter. Tests have shown that this power tool works stably even under high loads thanks to its special protection. Its power is average, 2600 W, but this is enough for uniform creation of strobes even in thick materials. The product is durable, but also noticeable in terms of noise during operation, its level of 95 dB does not remain without complaints.

Advantages

• Wide disc 23 mm;
• It makes 6200 rpm;
• The ability to adjust the width of the groove;
• Does not require the use of water;
• Low noise level;
• The minimum amount of dust.

disadvantages

• Weight 10.5 kg;
• Short cord;
• Sticky lock button.

Which wall chaser is better to buy

If you plan to use this tool to perform only wall chasing for laying pipes and wires, then a model with 2 discs will be enough. For those who are also going to cut something, it is better to pay attention to the "furrower".

For home use, a wall chaser with a power of up to 3000 W is quite enough, but if it is used by professionals, then at least 5000 W. For the arrangement of communications, the maximum cutting depth must reach at least 60 mm, and 30 mm can be dispensed with in laying cables. Please note that the more functions a product has, the more expensive it will cost.

So, the choice of a tool for slitting from this rating depends on the situation:

• For laying wires, you can choose Interskol PD-125 / 1400E.
• When assembling furniture or performing minor drywall work, it is worth buying a Bosch GNF 20 CA.
• For professional, long-term use, the Bison Shtroborez ZSh-30-1200 T will be the best choice.
• Fiolent B1-30 copes well with cutting hard materials.
• To work with concrete, you need a Makita SG1251J or ShTBE-2600 / 230M Caliber.

Even a good wall chaser can have minor drawbacks, so before choosing it, you should carefully read the description of the product and study the reviews about it.