Best miter saws

If you need to cut at a certain angle, both wooden blanks and thin metal, plastic, you cannot do without the best miter saw. But for it to give the desired results, the tool must be of high quality, safe, simple and convenient to use. Just taking into account such parameters, our rating was compiled, in which you will find budget models, middle and premium class options.

Which company miter saw is better to choose

The rating includes products from 7 popular manufacturers with good characteristics, numerous reviews of experts and buyers. These companies include German, Russian and some other firms. Here's who are on the leaderboard:

• Hammer - a brand of power tools for professionals, distinguished by their compact size, high speed (about 5000 rotations per minute), low noise level and reliable protection against overheating. The devices can easily withstand heavy loads and are successfully used for different types of sawing. They are effective in working not only with wood, but also with thin aluminum surfaces.
• Bison - a budget manufacturer of power tools, among which there are saws. They are used for both simple and complex cutting of blades at different angles of inclination of the disc. The large entry depth of the working elements and their decent diameter guarantee the acceleration of the process. The products have a powerful engine that can handle even high loads.
• Caliber - brand devices are suitable for processing workpieces not only from wood, but also from plastic and aluminum materials. They cope with a wide range of thicknesses with a large cutting disc and keep waste at an acceptable level. The company's products are distinguished by a compact table, reliable stops and clamps, which guarantee a safer and more efficient use of miter saws for wood and other materials.
• Metabo - a manufacturer of professional electrical equipment, which is distinguished by high build quality, good engine power, sharp discs. The company's products are functional and reliably protected from premature failure. The diameter of the cutting elements ranges from 216 to 315 mm, depending on the specific model.
• Makita - the range of the company abounds with miter saws, the average power of which is 1600 W. The instruments have discs with a diameter of about 20 cm, rotating at a speed of 3000-6000 revolutions per minute. Many of them are equipped with a comfortable table and a broaching mechanism that improves the quality of work.
• Bosch Is a German manufacturer of mainly premium products. Its saws are compact and lightweight, equipped with a comfortable handle and durable stops. The company's structures are distinguished by high-quality assembly and are made of durable materials. They have easy-to-replace cutting elements and intuitive operation.
• DeWALT - brand saws are appreciated for their good quality and high level of safety for the user. They keep the work surface clean when equipped with a dust collector. Most of the assortment is represented by network models powered by an outlet. The average power of the product is 1300 W, the cutting depth is about 3 cm, however, the tools weigh about 15 kg.

The best circular saws according to user reviews

Rating of the best miter saws

Efficiency, safety and usability of the devices were among the main selection parameters. Before being included in the rating of miter saws, we analyzed the characteristics of the products and customer reviews.

Here are the other criteria used to compare the instruments:

• Power;
• Rotational speed;
• Cutting depth and width;
• Methods for processing canvases;
• The types of materials with which the tool works;
• Noise level;
• Power supply methods and cord length;
• Engine protection;
• Disc diameter and sharpness;
• Possibilities for table expansion;
• Dust box size;
• The weight;
• Equipment;
• Illumination of the working surface;
• Easy replacement of cutting elements.

One of the selection criteria was the ratio of price and quality of goods, their functionality and availability.

TOP 9 best drills according to user reviews

Best inexpensive miter saws

On average, the cost of such products is 6000-10,000 rubles, usually their power is 1000-1500 watts. These options are suitable for home applications where speed and performance are not the most important parameters. There are not very many inexpensive devices on the market, and 4 models were selected from the analyzed offers.

Hammer STL1400 / 210

The powerful Hammer STL1400 / 210 saw is designed for long cuts in wood and machining aluminum profiles. With its help, the cut is made exactly in any direction - straight, oblique, at an angle. This is facilitated by a special base for holding the material. The model is equipped with a work table with optimal dimensions and a rotating surface, which makes its use more efficient and comfortable. Strong aluminum was used to make the base.

Advantages

• Rotation speed - 5000 rpm;
• Power - 1400 W;
• Can be connected to a vacuum cleaner;
• Good equipment;
• Deep disc entrance;
• Considerable dust collector.

disadvantages

• Weight 6.3 kg.

The inexpensive Hammer STL1400 / 210 miter saw has several cutting depths, which depend on the angle of inclination of the blade: at 45 ° it is 3 cm, at 90 ° - 5.5 cm, and the cutting width is 12 cm.

Bison ZPT-210 - 1400 l

It is a compact miter saw that makes it easy to work with both large and small workpieces. The set includes a table for fixing the device, if necessary, its position can be easily changed by 47 degrees to the left and right. The disc of the model is sharp and cuts accurately, but it cannot cope with a thickness of more than 60 mm. For high-quality performance of work, the manufacturer has provided laser illumination of the cutting line stroke. The device operates at a power of 1300 W and with such parameters it separates well not only wood, while the disc diameter is 21 cm, which reduces the time.

Advantages

• Low noise level;
• Ease of installation;
• Ease of transportation;
• Does not chip at the disc exit;
• Excellent saws, even at different angles.

disadvantages

• Weight 6 kg;
• Not instant dust removal.

The reviews indicate that when working with blanks, the canvas does not go to the side, but it still takes time to get used to the laser marker.

Caliber PTE-1750/255-Am

Saw "Caliber PTE-1750/255-Am" is designed for cutting plastic, not thick aluminum, wooden blanks. The device does its job perfectly both at oblique angles and in the straight position of the cutting blade. It is protected from overheating by built-in ventilation, which prevents premature failure. It is convenient to use it due to the ability to change the position of the table, which is carried out using a convenient handle and a clear scale. The model is suitable for both hobbyists and professionals who need a worthy alternative to a sawing machine.

Advantages

• Cutting depth - 70 mm;
• Power 1750 W;
• Disk rotation speed - 6000 rpm;
• Effective dust removal system;
• Ease of Management;
• High build quality.

disadvantages

• Weight 13.6 kg;
• The cutting width is 13.6 cm.

Metabo KS 216 M Lasercut

A compact, affordable miter saw that is easy to carry in one hand.If necessary, the device can easily change the cutting disc, there is a preliminary spindle lock. All controls are visible and easy to use. The saw head tilts to the left for more accurate and efficient back cuts. The work is carried out safely due to the high supports that move to the side. The support extends for machining long workpieces. The model operates from the mains, the accuracy of the results is guaranteed by laser marking of the cut line.

Advantages

• Long dust suction channel, which improves dust collection efficiency;
• Fast and easy setup;
• Ease of transportation;
• Cast construction;
• Cable length 2 m;
• The number of revolutions is up to 5000 per minute.

disadvantages

• Weight 9.4 kg;
• Noisiness.

The dimensions of the support surface of the device are 155 x 725 mm, so long workpieces can also be freely placed on it. The cut width varies on average from 80 to 120 mm, depending on the angle of the disc.

The best mid-range miter saws

Such products have the greatest demand and their choice on the market is just the richest. They can be used for both small jobs and professional use. The rating contains options selected taking into account efficiency, safety, ease of use, etc.

Hammer STL1200 / 210C

The budget miter saw Hammer STL1200 / 210C is the best in 2024 in terms of versatility, it is suitable for oblique, inclined, transverse, longitudinal section of wood, including those with a plastic coating. Despite its average power of 1200 W, the tool cuts materials reliably, efficiently and accurately. Convenience and efficiency of its use lies in the considerable width and height of the disc stroke - 12 cm and 5.5 cm. The device operates only from the mains, so access to the socket is required.

Advantages

• Additional emphasis included;
• Rotation speed - 4500 rpm;
• Good dust collection;
• Adequate noise level;
• Flexible settings;
• Good build quality.

disadvantages

• No soft start;
• Lack of backlighting.

Makita LS1040F

The Makita device is compact in size and powerful enough to perform complex work on angular, transverse, longitudinal cutting of blades. At full load, the engine runs stably and is almost cold, which extends tool life. The large diameter of the disc provides a penetration of 9.3 cm into the surface. Convenience and efficiency of use are guaranteed by additional stops in the set, which are especially important when working with long workpieces. The high precision is due to the die-cast aluminum table with a rotary ruler.

Advantages

• Effective dust collection;
• Transparent protective cover;
• Excellent visibility of the cut;
• Reliable blocking of inclusion;
• Precise engine braking system;
• Cleanliness of the working area.

disadvantages

• High price;
• Some dust remains after removal.

Bosch PCM 8 S

Bosch PCM 8 S is a desktop model and is suitable for home use. This is a miter saw with a feed that guarantees a neater and more precise cut of large workpieces. Also, good results are associated with the use of laser marking, a support expander and a clamp for fixing materials. This option is especially convenient for preparing grooves due to the presence of a depth stop. The tool is equipped with a powerful 1200 W motor, which can handle even more demanding tasks. The product is easy to transport due to its convenient handle and compact size.

Advantages

• Robust construction;
• Reliable engine braking system;
• Sharp disc;
• Smooth turn;
• Withstands high loads;
• Not heated.

disadvantages

• Not a low price;
• Weight - 11.4 kg.

The reviews note that when using the Bosch PCM 8 S, the work surface always remains clean due to the dust collector included in the kit, presented in the form of a bag.

Bison ZPT-190-1200 PL

Inexpensive miter saw Zubr ZPT-190-1200 PL is suitable for all types of work - cutting at right angles and oblique angles, for combined processing. The device has a movable head that allows you to increase the width of the web in one go. The set includes a rotary table that can be fixed in any position, making it easier to use the tool. The workplace stays clean thanks to efficient sawdust removal, which also prevents them from entering the eyes. The power of the device is 1100 W, it is powered from the mains, the cable length is 2 m.

Advantages

• Compact dimensions;
• 60 months warranty;
• Good dust extraction;
• Self-closing protective cover;
• Structural strength;
• Weight 9 kg.

disadvantages

• Lack of laser illumination.

One of the best miter saws "Zubr ZPT-190-1200 PL" provides a depth of up to 30 mm with a disc angle of 45 °, and in the case of a straight cut it is immersed in the blade by 50 mm.

The best professional miter saws

Such models are premium and usually cost more than 15,000 rubles. They are convenient to use, safe for humans and versatile - they are used for various types of cuts. Their choice from manufacturers is not as wide as in the case of budget models and mid-range options. Of the 10 proposals, the TOP includes 4 tools, the best according to customer reviews.

Makita LS1216

The device is not cheap and belongs to the professional options due to its capabilities. The tool easily tilts vertically to the right and left sides at an angle from 0 to 45º, in a horizontal position - up to 52-60º. A well-thought-out engine braking system and a soft start mechanism are responsible for safety and efficiency of use, which does not allow the product to fail. Instead of two long guides, the model uses 4 short guides for making bevel, cross and longitudinal cuts.

Advantages

• Deep disc inclination with the possibility of fixation;
• Structural strength;
• Sharp disc;
• Low noise level;
• High-quality assembly;
• Does not heat up;
• Cuts neatly.

disadvantages

• Lack of laser cut mark;
• Idling - 3200 rpm.

The Makita LS1216 model weighs 26.3 kg and, in fact, is a full-fledged machine for professional use, but some difficulties can arise with its movement.

Bosch GCM 8 SJL

This is a cheaper option compared to the previous one, although in terms of functionality it does not lose. The improved two-point dust extraction system guarantees high quality and ease of use. The ability to cut horizontally by 31.2 cm allows the device to be used at different angles and for processing long workpieces. Accurate results are ensured by laser marking and side broaches. The tool handles grooves well due to the depth limitation. The product is easily transported due to the built-in handle, although it weighs 18 kg.

Advantages

• Good performance;
• Rotation speed - 5500 rpm;
• Power - 1600 W;
• Flexibility to adjust the angle of inclination;
• Excellent dust extraction;
• Work surface cleanliness.

disadvantages

• Not found.

DeWALT DW717XPS

This miter saw is considered to be the best for ripping purposes, although it does a good job of ripping. It is efficient for both light and difficult jobs thanks to its powerful 1675W motor. However, even under high load, the motor does not heat up and lasts long enough, according to reviews. An interesting model makes it possible to control the working line thanks to the shadow from the disc. The XPS system, which is responsible for this, does not require adjustments and guarantees the accuracy of placing the material in the right place, as well as good surface visibility.

Advantages

• Disc with 60 teeth;
• The key for him is in the set;
• Roomy dust collector;
• Saws at an angle of 90 degrees to a depth of 15.2 cm;
• Cutting element diameter - 25 cm;
• Surface stability;
• Idling parameters - 4000 rpm.

disadvantages

• Weight 23 kg.

Metabo KGS 315 Plus

The device is included in the rating due to its high performance, which can be attributed to a powerful 2200 W motor, as well as due to the speed of up to 4100 rpm. If necessary, this parameter can be adjusted, which allows you to choose the best value for cutting plastic, wood or aluminum profiles. Long workpieces are conveniently processed due to the broaching mechanism. The saw is easy to operate, in particular because there is no sawdust left on the surface.

Advantages

• Expansion of the table;
• Aiming laser for improved cutting quality;
• High stops;
• Increased disk sizes;
• Easy replacement of the cutting element;
• Performs a large amount of work.

disadvantages

• Poorly sucks up chips.

Metabo KGS 315 Plus has a simple operation, all its elements and scales are visible from the working position. With its help, it turns out to make high-quality grooves thanks to the limit stop. Precise cutting is ensured by a clamp for fixing the workpiece and additional table extensions.

Which miter saw is better to buy

For occasional woodwork, it does not make much sense to buy professional models, which are more relevant for a significant amount of work. The main indicator of device performance is power, the minimum recommended value here is 1000 W, and the higher it is, the less parts will heat up.

Here's which miter saw to choose, depending on your goals:

• For working with aluminum surfaces, Hammer STL1400 / 210, Metabo KGS 315 Plus or Zubr ZPT-210-1400 hp will be relevant.
• The model "Caliber PTE-1750/255-Am" or Metabo KS 216 M Lasercut will perfectly cope with plastic.
• Hammer STL1200 / 210C is ideal for longitudinal dissolution.
• It is most convenient to work with long workpieces using the Makita LS1040F.
• Bosch PCM 8 S or Zubr ZPT-190-1200 PL will help to make high-quality grooves.
• Those looking for a cheaper alternative to a machine tool should look at the Makita LS1216.
• For corner cuts, the Bosch GCM 8 SJL is the best option.
• DeWALT DW717XPS will cope with complex work with dignity.

Before choosing the appropriate option from the rating of miter saws, first of all, you should decide on the budget, because the capabilities of the devices depend on this.