The best adhesives for plastic

Plastic products take more and more place in human life, are used in everyday life, in production, in car repairs. To connect plastic materials, you must use a special glue that will provide an instant and tenacious bond. Not all manufacturers create a high-quality adhesive composition, therefore a rating was created, which describes the best adhesives for plastic that correspond to high quality.

Adhesive for plastic, which company is better to choose

There are many manufacturers that produce adhesive products, but not all of them have good quality indicators. The best adhesives for plastic are produced by the following manufacturers:

• UHU Is a German company founded in 1884 by chemist August Fischer in Bul. In 1932, the first transparent synthetic adhesive was created, capable of gluing all types of plastic. The company monitors the emergence of new technologies, uses them, improving the quality of the goods.
• Cosmofen - a German firm of adhesives, its products are used for joining stretch ceilings, plastic windows, rubber boats. The purpose of the product is wide; it is supplied to different countries of Europe and throughout Russia.
• Moment - a trade mark under which polyurethane foam, sealants and other gluing products are produced. The first product was released in 1979 at the Tosno Household Chemicals Plant in the Leningrad Region.
• Bison - the company was founded in 1938 in Holland. Its adhesives have fast properties, interact with any plastic surfaces. The manufacturer exports goods to many countries in Europe and the CIS.
• Contact - the manufacturer uses modern technology to create an adhesive created for plastic, shoes, car parts, windows, doors and other materials. The convenient cap allows you to use the product several times, avoiding drying out.
• Second - the company has been operating for more than 15 years, offers several types of adhesives, which differ in shape and size. The composition is of high quality, the product instantly adheres to the desired surface, provides emergency assistance in many life situations: peeling off the soles on shoes, a broken kitchen cabinet handle, and others.
• Mastix - a large domestic manufacturer of adhesives for anaerobic sealants and cold welding. Mastic is used in the world market of products, exported to various European countries, used in Russia.
• Henkel - a German brand of adhesives that quickly fill the mass, instantly become solid. The chemical base is a 2-component polyurethane adhesive. The product is used not only in Russia, but also in Europe.

Rating of adhesives for plastic

It is necessary to choose an adhesive for plastic taking into account many characteristics, so the rating was formed taking into account the opinions of experts, consumer reviews, comparative tests among many nominees. But, in order to get a broad idea of ​​the quality and practicality of the tool, the following characteristics were additionally taken into account:

• Drying speed;
• Bonding strength;
• Resistant to water and temperature;
• Volume;
• Ease of application;
• Price.

Additional technical characteristics allowed us to draw up a rating showing which adhesive composition should be used to quickly cope with the task.

Best Liquid Nails

The best super adhesives for plastic

Superglue for quick adhesion of plastic to the surface must be of high quality, have a good composition, and produce an instant effect. The product must be selected depending on the type of plastic, as they have different properties. Here you need to distinguish between liquid, contact, reactive agents, hot melt adhesives or universal adhesives that are used in different areas.

To build the rating, 10 varieties of superglue were analyzed, practicality, functionality, and setting speed were assessed. Of the entire list, only 4 generic-type products have been tested.

UHU Plast

An all-in-one, instant-on-effect product that turns dry in minutes. It has a thin metal needle, with its help you can glue small surfaces in hard-to-reach places. The composition is made on the basis of synthetic resin, it is used for hard plastic and polystyrene, also suitable for polycarbonate and plexiglass. It is not used for gluing acetal resins, polypropylene, polyethylene, in this case they will be ineffective. The composition can withstand temperatures ranging from -30 to +90 degrees, it is resistant to any changes inherent in Russia. The dried product is safe for humans, does not emit chemical odors, therefore it can even be used for gluing the surface in the dishwasher. The composition sets within 5-10 minutes, the final adhesion is achieved in 24 hours. Only after this time can it be exposed to water, sun or frost.

Advantages

• Adheres well;
• Suitable for many materials;
• Has a transparent appearance;
• Dries quickly;
• German manufacturer.

disadvantages

• Not noticed.

According to the reviews, it can be seen that the tool interacts with many materials, but not everyone is suitable. It dries quickly, but for safety, it is recommended to use the glued surface not earlier than in a day.

Cosmofen Plus-S for PVC

The composition provides fast and high-quality bonding of parts made of foamed and rigid PVC. It is used for billboards, exhibition pavilions, repairing windows and doors, pipes, gutters and other plumbing fixtures. Such heat-resistant plastic adhesive can withstand temperatures ranging from -25 to +90 degrees, does not deform its condition under the influence of alcohol, water, gasoline, oils. The consistency is light, it spreads well, flows into the smallest cracks of the material. The base is polymers of vinyl chloride in liquid form, the product acquires strength within 5-7 minutes. Once opened, it can be used for a year, then gradually loses its properties. It is advisable to store unused composition in a dark place, without exposing it to sunlight.

Advantages

• Affordable price;
• Bonds quickly;
• Dries instantly;
• After drying, the unpleasant odor is neutralized;
• Resistant to sunlight.

disadvantages

• There is a strong odor during operation.

The reviews emphasize that the product sticks together many surfaces, but when working with it, there is a sharp, unpleasant smell. It is advisable to carry out repair work in a special mask, protecting yourself from the appearance of allergies or diseases of the respiratory system.

Moment Plastic

The product for bonding interacts with different types of plastic, reliably adheres to the plastic surface, and is considered resistant to frost and moisture. Its transparent appearance allows it to be used for jewelry work, filling even the smallest seams. It reacts quickly with polystyrene, hard or soft polyvinyl chloride, and many types of plastic. It is not used to bond polyethylene, polypropylene or telephones.A moderate odor is noticeable only at the very contact with it, after drying it takes on a jelly-like appearance, does not emit any smell at all.

Advantages

• Low price;
• Bonds reliably;
• Suitable for many materials;
• Moisture resistant;
• Transparent view.

disadvantages

• Thick nose, need to use an adapter needle.

The tool copes well with its functions, provides a reliable grip, and has moisture-resistant functions. The quality of the product is at a high level, despite the fact that it has a rather low price.

Bison "Plastic"

Strong all-round home repair adhesive that interacts with many plastic products. It is used for bonding synthetic materials such as polycarbonate, acrylic plastics, rigid PVC. It is suitable for gluing various household appliances, repairing phones, printers, computers, keyboards. Its transparent appearance allows you to use it to work with any small details, it does not leave marks, has no color. Heat resistance is observed even at a temperature of 100 degrees Celsius. It is produced in a convenient tube, has a thin dispenser, does not stick hands when in contact with it. Not suitable for PTFE, PP and PE.

Advantages

• Adheres firmly;
• Has no color;
• The smell dissipates when dry;
• Suitable for most surfaces;
• Does not cause allergies.

disadvantages

• Pungent odor on contact with it.

Consumers often write in their reviews that the product easily adheres to the surface and guarantees complete drying in a few minutes. It is not recommended to expose the material to the sun or water for 2-3 hours after bonding, as the properties may be slightly compromised.

The best waterproof adhesives for plastic

Waterproof compounds are used for gluing surfaces that are constantly exposed to moisture. The funds are often used to repair PVC connecting pipes, kitchens, bathrooms. They adhere firmly, dry quickly, allow the surface to be used as intended after a few hours. In the composition of such funds there are some harmful substances, therefore, they are not recommended to be used for repairing products with which human skin contacts daily.

Only 3 waterproof adhesives are selected for the rating. They passed the full selection, in which 7 items were evaluated. The selected list of products is characterized by high strength, quickly adheres to the surface, does not cause allergies when in contact with it.

Contact

Chinese waterproof glue is made on the basis of synthetic thermoplastic elastomers, which are designed for bonding plastic, as well as for repairing shoes, leather and rubber. It is produced in a minimum volume of 30 ml, is consumed economically, does not have a pungent odor. The product is durable, elastic, dries quickly. For complete curing, 24 hours are required, after this time the material can be used for its intended purpose, without fear for its integrity and safety. After drying, it acquires a plastic, transparent appearance, does not worsen the external condition of the repaired material. Contact adhesive for plastic contains harmful components, therefore, during its use, it is advisable to wear a mask on the face in order to avoid direct contact of the nasal mucosa and its substances.

Advantages

• Reliable fixation;
• Copes with its functions;
• Affordable price;
• Economical consumption;
• Perfectly glues any plastic.

disadvantages

• Chemical composition and smell.

As customer reviews show, the product is used for thorough bonding of any kind of plastic, it comes into activity in a few minutes. A more lasting result is observed within a day. It is recommended to work with gloves and a mask to avoid negative effects on the skin and nasal mucosa.

The best adhesives for wood

Moment 88

The water-resistant composition is used for gluing rubber, metals, glass, ceramics, polystyrene.It will be ineffective in the reconstruction of dishes, styrene, polypropylene. The unique formulation of the plastic adhesive is able to firmly glue the material, ensuring its durability, practicality and safety in use. It is characterized by particularly durable properties, due to which it is used in many industries, as well as in household work. It has a moderately pronounced odor, which disappears literally in a few minutes upon the first contact with the surface. After a day, it is completely neutralized, without creating any discomfort.

Advantages

• Perfect adhesion;
• Dries quickly;
• Used for many surfaces;
• Easy to apply;
• Good tenacity.

disadvantages

• Gives off a strong odor.

Most reviews indicate that the moisture-resistant glue does its job, safe when used correctly. Some consumers recommend interacting with it in the fresh air, since in an enclosed space it can create a pronounced unpleasant odor and provoke dizziness.

Second

A multi-purpose adhesive is used to bond any surface made of plastic material. It has a handy, slim dispenser that helps to dispense a minimal amount of product. The product is resistant to water and high humidity, it is also used for outdoor use, does not decompose under the influence of snow and rain. If you have no idea what kind of glue to glue the plastic, "Secunda" will be an excellent option. It is colorless, has no pronounced odor, you can interact with it even indoors. A 30 ml tube is enough for multiple uses. In addition to plastic, it adheres perfectly to rubber, leather, and is used to repair shoes.

Advantages

• Low price;
• Suitable for many materials;
• Has no pungent smell;
• Convenient to use;
• Transparent view.

disadvantages

• Dries up if not used.

Epoxy glue for plastic is applicable for frequent use; when opened, it cannot maintain a liquid state for a long time. When using it, there is no pungent smell, it does not cause allergies, it is considered one of the most practical and affordable gluing agents.

The best heat-resistant adhesives for plastic

Heat-resistant glue is used for domestic and industrial purposes, it is used for finishing stoves, saunas, fireplaces, baths. The composition of the product must withstand high temperatures for a long time, not lose its original mechanical strength. The product is made from refractory mineral clay and special fillers, which guarantee a reliable, durable fixation, as well as resistance to high temperatures. When compiling the rating, the technical characteristics of many products were taken into account, and out of 5 nominees only 2 were selected. They have good resistance to thermal factors, allow themselves to be used under the influence of high temperatures.

Mastix poxy termo

Epoxy glue is designed for quick repair of glass, wood, colored materials that are susceptible to high temperatures. It retains its properties at temperatures up to 250 degrees, interacts with different surfaces. For better tenacity, the material must be prepared for the application of glue, having previously cleaned it from rust, dirt, and degreased. The adhesive sealant is mixed in equal proportions in one container, mixed until homogeneous and applied to the work surface. The mixture retains its properties for 4 hours at a temperature of 20 degrees, after which its properties gradually decrease. It acquires a solid appearance within 6 hours at temperatures up to 25 degrees. The final effect is achieved in a day.

Advantages

• Reliable fixation;
• There is no unpleasant smell;
• Good heat-resistant properties;
• Ease of use;
• Bonding within 6 hours.

disadvantages

• Not found.

Reviews indicate that Mastix Poxy Termo requires careful preparation when using it.It is necessary to pre-clean the used surface, get rid of rust, dirt, dust, ensuring full fixation of the adhesive material.

Terokal 9225

The two-component plastic adhesive is based on polyurethane and is packed in practical double cartridges. It is used for repairing bumpers, polymer parts, polycarbonate, polyurethane and others. It guarantees fast polymerization, and can be hidden under car refinish varnishes. Before use, all parts for exposure must be cleaned, get rid of oil, grease, grease, moisture. Also, the bonding sites are additionally treated with a primer, which will ensure reliable fixation. The glue itself dries quickly, forms a light foam within 30 minutes, complete drying occurs in 5-6 hours. It must be stored at a temperature of 25 degrees, under the influence of a low degree, it can lose its properties.

Advantages

• Fast fixation;
• Complete drying in 5-6 hours;
• Has no pungent smell;
• It is economically consumed;
• Wide application.

disadvantages

• Loses properties at low temperatures.

The reviews note the fact that Terokal 9225 has a wide purpose, is safe for use, does not leave marks and an unpleasant odor. It adheres to many surfaces that need to be cleaned and primed for better adhesion.

Which glue for plastic is better to buy

Before starting repairs, you need to know how to glue the plastic in order to ensure reliable adhesion for many years without endangering the structure. Manufacturers create many varieties of funds, and the following types are noted from the entire rating:

• UHU Plast is a universal quick bonding agent;
• Contact - good quality waterproof glue, used for;
• Bison "Plastic" is a versatile product for home renovation;
• Second is a standard water-resistant plastic adhesive;
• Mastix Poxy Termo is a heat resistant epoxy super glue suitable for bonding materials exposed to high and low temperatures.

It is necessary to choose a tool depending on personal goals and the materials being repaired. Each compound will cope with its functions, guaranteeing reliable grip for many years.