The best paints for metal

Metal is one of the most common and affordable building materials. It is often used for the manufacture of gates, fences, garages, and supporting structures. But among the many pluses, there is one significant minus. This material oxidizes and rusts in a humid environment. Better paints for metal create a durable protective film that can extend the life of sensitive structures.

Which company is better to choose paint for metal

The shelves of hardware stores are not in short supply, this also applies to paints. But when buying, I want to give preference to trusted manufacturers who thoroughly approach the development of their products. In terms of the ratio of all the requirements, the following brands turned out to be the best:

• Panzer Is a Serbian company that develops materials for finishing works. Engineers are constantly coming up with new formulations, creating unique formulas. Therefore, their compositions are undemanding to surfaces and application conditions, and sometimes surpass competitors in operation.
• Teknos Is a Finnish company whose history began in 1948. Then, to start production, it was enough for the founders to rent an old poultry farm. Today it is of international importance even among famous architects. But he does not deviate from his traditions, remaining a family business.
• Inral Is an Italian brand that produces universal enamel paints in the form of sprays. The managers are confident that this format is the most convenient to apply and achieve a high-quality result.
• Tikkurila Is a Finnish company founded in 1862. Its founders started their business as an oil mill. But over 150 there have been many changes, so today it is the largest manufacturer of paints and varnishes around the world. Chemists are trying to create sustainable solutions for surface decoration.
• Aquest Is a Russian company operating since 1998. They produce over 5000 tons of paints and varnishes annually. The owners try to maintain good performance without increasing the price
• Graspolimer Is a Russian brand engaged in the production of enamels, self-leveling floors and protective and decorative coatings. Therefore, their products are particularly robust and durable.
• Teping Is a Russian company selling seamless self-leveling floors and polymer materials. They carefully select components for harsh climates and operating conditions.
• Hammerite - the company that laid the foundation for hammer paint for metal. In 1962, chemist Alain Forster conducted experiments, during which he managed to obtain a new composition. Its components fought well against rust without first cleaning it.
• Husky - an offshoot of the large Moscow production of CJSC Descartes. All stages of development are carried out on German equipment in compliance with European safety standards. Today, under the Husky brand, 4 diverse lines are produced. On the official website, you can always contact a representative to get advice.
• Lacre - Russian manufacturer of paints and varnishes. The company's factories are located in many European countries: Germany, Poland, France and others. Therefore, the teams are constantly improving, adopting the experience of foreign colleagues.
• Novocolor Is an Italian brand of decorative coatings that opened its production in 1982. Now 7 factories are engaged in the development of new formulas. For almost 30 years, engineers have been able to develop environmentally friendly compounds suitable for finishing work in hospitals, kindergartens, schools.

Rating of paints for metal

The rating was compiled based on the opinions of architects, painters, online reviews, customer reviews. Based on such studies, it was possible to identify characteristics that you need to pay attention to when buying a coloring material:

• Resistance to environmental factors;
• Durability;
• Assortment of colors;
• Composition;
• The ability to use indoors;
• Anti-corrosion properties;
• Protection quality;
• The required number of layers;
• Application methods;
• The sharpness of the smell;
• Density;
• Adhesive properties;
• Complexity of surface preparation.

All representatives of the top have their own characteristics that distinguish them from competitors.

The best paint for rust

The best alkyd paints for metal

Alkyd components attract the attention of buyers for their durability. Unlike other species, they do not crack, do not turn yellow over time. Fast drying allows them to be used for interior finishing work. For the analysis, the expertpro.techinfus.com/en/ team selected 9 options, among which the following 4 were the most interesting.

Panzer enamel smooth

One-component paint for rust and metal smooths unevenness well and contains components that destroy corrosion. Therefore, the harmful chemical reaction is quickly neutralized. The consumption is quite economical. A volume of 0.75 ml is enough for a single coat of 6 m²... Thanks to PanzarStahl technology, a shell is formed that provides surface protection for up to 5 years. It is not necessary to dilute the mixture with a solvent. And application is possible with any convenient tools: roller, brush, spray gun. Complete drying is achieved within 6 hours.

Advantages

• Overlaps other colors well;
• Sheer gloss;
• Lies flat;
• Convenient consistency for work.

disadvantages

• Strong smell.

Panzer comply with product safety requirements, so the composition is free of toluene and lead compounds.

Teknos Kirjo PM3

Exterior metal paint is ideal for covering sheet roofs, galvanized surfaces or light metal surfaces. High density smooths out irregularities qualitatively, even when applied in 1 layer. Theoretical flow rate is 11.5 m²/ l. To provide anti-corrosion protection in all working layers, it is recommended to pre-prime the surface.

Advantages

• Convenient choice of volume;
• Does not require dilution;
• Many shades;
• Neutralizes acid gases in the atmosphere.

disadvantages

• Dries for a long time

It is better to carry out work in sunny, warm weather, since unforeseen precipitation can spoil the result.

Inral Universal RAL 9017

Multipurpose spray paint is not limited to metal painting and can be used on wood, plastic, plaster, car bodies. The can eliminates the need for additional tools and hand contamination. However, a softer composition requires surface preparation. The manufacturer recommends sanding, degreasing and priming it. Then the application will be more even.

Advantages

• Long shelf life - 60 months;
• Large assortment of colors;
• Convenient application;
• Suitable for many small jobs.

disadvantages

• Wasteful consumption - 1 cylinder is enough for 2 m².

Before spraying the contents, it is better to protect yourself with construction goggles and a mask, since small drops fall into the lungs and mucous membranes.

Tikkurila Panssarimaali

The version from the premium line of the manufacturer has good wear resistance. Therefore, it is used for painting roofs and outdoor structures. The composition is unsafe for indoor work, as it contains barium pigment, zinc oxide.The application is better with a brush. Despite such difficulties, the result pleases the owners. A semi-gloss shimmer after drying will attract attention, and a wide selection of shades will give a bright accent.

Advantages

• Resistant to chemicals;
• High density;
• Economical consumption;
• Convenient volume.

disadvantages

• Demanding on the application conditions.

Buyers are advised to choose a tone slightly darker than planned, since the color brightens in the sun.

The best acrylic paints for metal

If painting work is supposed to be done on decorative elements, then acrylic components will do just fine. They are easy to apply and retain their original appearance for several years. However, they do not provide reliable protection against rust. Among the 8 options considered, only 1 stood out.

Akvest-15 Master semi-matte super white

Heat resistant metal paint is ideal for painting radiators and downpipes. If desired, a different color solution is allowed to mix the white base with colors. Before use, Aquest must be diluted with water, adding no more than 5% of the total mass. And the surface is cleaned with a wire brush and degreased. For application, any tools are suitable, which, after finishing the decoration, can be easily washed off with running water.

Advantages

• Affordable price;
• Heat resistance;
• There is a corrosion inhibitor;
• There is no strong smell.

disadvantages

• Only 1 color.

It is necessary to remove splashed drops before they are completely dry. To do this, it is enough to wipe them with a damp cloth.

The best epoxy paints for metal

Epoxy components can be aerosol, powder, two-component. The application technology, coating hardness, appearance, and wear resistance depend on their type. Nine nominees took part in the comparison, but 2 were the highest quality, according to experts-expertpro.techinfus.com.

Graspolimer EP53-P

Epoxy paint for metal has a high degree of protection against environmental factors: pressure, chemicals, oils, oil, sea water. Therefore, it can even be used to paint aircraft hangars. Moreover, the coating retains its properties for up to 10 years. 1 m² consumption is 250 g. For each next layer, this indicator will decrease. Drying time depends on the ambient temperature. Drying is much faster at 30 degrees.

Advantages

• Glossy surface;
• Long lasting;
• Elastic;
• Resistance to chalking.

disadvantages

• The price is above average.

Applying such a mixture requires certain skills. Since the "life" of the mixture in the container is no more than 20 minutes. This must be taken into account when planning the processing of large areas.

The best floor paints

Teping P 1155

Metal paint is a two-component epoxy resin compound. The high solids content of up to 93% creates a very strong barrier and can therefore be used on concrete. Before the first use, the diluted mixture must be kept for a day at room temperature. This will give it a suitable consistency. Teping is interesting because you can experiment with texture. For example, quartz sand can be used to create a rough layer.

Advantages

• Economical consumption;
• Resistance to aggressive environments;
• Does not wear off;
• Easy to care for.

disadvantages

• Multi-step instructions for use.

The manufacturer advises to wash the coating regularly. Thus, it will be possible to avoid scratches, cracks and extend the service life.

The best hammer paints for metal

Decorative mixtures got this name due to the effect of chasing on metal, made with a hammer. This type is resistant to temperature extremes and dries quickly. Therefore, it is suitable for processing outdoor surfaces. The selection was carried out among 7 nominees, and 2 were the most worthy.

Hammerite hammer copper

Hammerite metal paint is interesting in its copper color.Since such a solution will look good on hedges, gates, garden furniture and is suitable for barbecues, giving them the effect of forged products. Despite the small packaging, even 0.75 liters is enough to cover 10 m²... The fine texture in combination with a glossy shine hide possible defects. And the thoughtful composition has adhesive, anti-corrosion properties.

Advantages

• Almost does not smell;
• Affordable price;
• Noble color;
• Finishing warranty period - 8 years;
• Suitable for interior work.

Users share that with the acquisition of Hammerayt, they renewed half of their furniture, and it began to play in a new way.

Husky Klondike navy blue hammer

Fast drying metal paint can also be used on steel objects. Not demanding on surfaces - application is possible on already painted parts or on rusty places, after preliminary cleaning with a brush. Subject to these simple application rules, the protection period can be up to 8 years. Work is possible with the use of any convenient tools: brushes, rollers, spray guns. Complete drying is achieved after 24 hours.

Advantages

• Smoothly applied;
• Warranty - 24 months;
• Explicit decorative effect;
• Weatherproof.

disadvantages

• Limited number of colors.

Buyers share that the smell is not as harsh as that of the usual paints. Therefore, it is possible to paint products indoors.

The best oil paints for metal

Oil base is the most common coating option. However, in the future, it is possible to paint on it only with materials similar in composition. To compile the rating, 7 options were considered, but the choice stopped only on 2.

Lacra MA-15

It is made on the basis of linseed oil and is ready for use. But before starting painting work, the surfaces must be carefully prepared: cleaned from rust / scale, degreased, covered with an alkyd primer. Then its service life will increase. If the consistency seems dense, then it can be brought to the "ideal" by diluting with white spirit. The consumption of such a mixture is profitable - 8 m²/ kg.

Advantages

• Warranty - 18 months;
• Convenient application;
• Even 1 layer is enough;
• Affordable price.

disadvantages

• Demanding to the surface.

When choosing this building material, you should pay attention to safety precautions: ventilate the premises well, avoid getting inside, on the mucous membranes.

Novocolor MA-15

A universal option for painting all surfaces. Suitable for metal, wood products, roofs, walls. Forms a film that is resistant to abrasion and static effects of water. However, it is very demanding on the place of application. It must be clean, dry, free from dirt and rust. The mixture is ready for use, if necessary, to give a more liquid consistency, it can be diluted with white spirit, turpentine, drying oil. Novocolor is fast drying. Even at 70% humidity, a fully finished appearance is achieved after 24 hours.

Advantages

• Easy to apply with any tool;
• Lies flat;
• Large selection of shades;
• Different volumes.

disadvantages

• Short service life - 1 year.

Buyers pay attention to the fact that there are no anti-corrosion components in the composition, so this option should not be used outdoors.

What paint for metal is better to buy

In order not to be mistaken in choosing a paint for metal, you need to indicate the type of surface to be treated, and hence the composition of the paint. For a durable result at a low cost, alkyd-based options are suitable. For small decorative items, take a look at acrylic paints. Representatives containing epoxy resins can create a durable barrier that protects surfaces for many years. If you need to give an unusual texture, hammer paints are suitable.

Each representative of the rating has its own characteristics:

• Panzer enamel smooth - has a patented protective technology that forms a dense "shell".
• Teknos Kirjo PM3 - economical consumption for dense surfaces.
• Inral Universal RAL 9017 is a universal spray paint.
• Tikkurila Panssarimaali - suitable for painting roofs, facades.
• Graspolimer EP53-P is a highly resistant exterior paint.
• Teping P 1155 - the most abrasion resistant.
• Hammerite hammer copper - creates the effect of forged products.
• Husky Klondike dark blue hammerhead - has distinct decorative properties.
• Lakra MA-15 is the choice for those who need to update their product inexpensively.

With a careful assessment of all factors and an individual selection of the appropriate option, the best metal paints will provide a good result for a long time.