The best plasters

In the construction industry, plaster mix remains an important and popular material, without which no major overhaul can do. If earlier it leveled walls and ceilings, today it is widely used for decorative finishing of apartments. And now you no longer need to make the solution yourself, you can buy ready-made mixtures in the store. Since the range of building materials is large, you need to understand them. The review presents the best plasters according to the opinion of specialists and repairmen.

Which company plaster is better to choose

Many companies are engaged in the manufacture of plaster mixtures. The material on sale is both imported and domestic production. The most popular are the products of the following companies:

• Knauf - the international concern was founded in 1932. Then the Knauf brothers began to develop a Schengen gypsum mine and produce building mixtures.
• Volma - The Russian company extracts natural gypsum stone, creates construction and finishing materials from gypsum and cement.
• Prospectors - in the assortment of the domestic company there is a large selection of plaster, putty, primer and other materials for repair.
• Unis - Russian-made building mixtures are supplied to 140 different cities. The gypsum deposit is located near Perm.
• Rusean - the brand offers inexpensive, but high-quality mixtures for decoration and construction. The modified formulations are made from our own raw materials.
• Etalon Story - in 1968 a concrete unit was opened and the production of foundation blocks began. During this time, the company has expanded its range and gained fame.
• Glims - the brand has been producing high quality dry materials for construction since 1994. The products are widely appreciated and in demand.
• Ceresit - building mixtures under this brand are produced by Henkel. It is a leading manufacturer of repair materials.
• Weber - the company cares about the well-being of people, therefore, it produces materials with the most safe composition. There are three factories in Russia.
• Litokol Is an Italian company founded over 50 years ago. Today, repair compounds, primers, trowels and adhesives are supplied to more than 100 countries around the world.
• Perel - dry building mixtures from a domestic manufacturer successfully compete with foreign analogues.
• Perfekta - the company was the first in Russia to develop and launch the production of dust-free mixtures based on natural materials.

Rating of plasters

The TOP includes the best plasters according to buyers and experts. The rating contains the highest quality materials that have shown themselves to be the best in practice. When choosing, the following important parameters were taken into account:

• Appointment. There are both universal compounds and mixtures intended only for leveling walls.
• Composition. Cement plaster is frost-resistant, and gypsum and synthetic mixtures are more plastic.
• View. Dry plaster in the form of thin sheets is attached to the frame with screws. Wet plastering is energy intensive and requires cleaning.
• Consistency. The dry material requires dilution with liquid, and the finished mixture is applied immediately to the surface.
• Property. Decorative plaster for interior decoration is mineral, silicone, silicate and acrylic.There are many colors on sale.
• Price. Domestic products will be cheaper, while the quality will be at the level of foreign analogues.

The applied product not only smoothes the surface, but also protects against natural phenomena and damage. To achieve the best result, it is better to buy products from trusted manufacturers.

The best floor paints

The best gypsum plasters

Plaster of Paris evens out the walls. It is used to prepare the surface before applying paint or glue. As a rule, interior rooms are finished with this material. It is practical, flexible and dries quickly - repair work can be continued within two hours after applying the layer. In this case, filling is not required. Gypsum is prized for insulating sound and heat well. The rating includes the most reliable materials.

Knauf rotband

Universal gypsum plaster contains polymer additives that increase adhesion. It is plastered on concrete or brick ceilings and walls, expanded polystyrene surfaces, cement-particle boards. The manufacturer recommends applying the material on a smooth base.

Also, the mixture is used for internal plastering of the walls of the kitchen, bathroom, where there is always high humidity. Due to its composition, the applied layer provides protection against moisture. Plaster is sold in bags with old and new designs, but the quality of the material is the same.

Advantages

• Dries quickly;
• Does not crack;
• Lies flat;
• Affordable price;
• Verified manufacturer.

disadvantages

• Fakes are often found.

In order not to fall for a fake, you need to carefully study the description on the bag. Original products are manufactured in Krasnogorsk. Also, the packaging must have a hologram.

Volma Layer

The most affordable Volma gypsum plaster is a white powdery mixture. Thanks to polymer fillers, the diluted solution quickly sets and adheres firmly to the surface. The layer reliably protects against moisture and shock.

The composition is plastered with gypsum cardboard, aerated concrete, reinforced concrete slabs, brick and wood. The material is used for restoration, elimination of minor defects, leveling surfaces, creating decorative elements in the form of an arch or relief. Masters choose this solution for its beautiful glossy surface and high environmental friendliness.

Advantages

• Plastic consistency;
• Affordable;
• Not dusty;
• Without smell;
• High quality.

disadvantages

• The mixture from different plants differs in color.

Since gypsum white plaster loses its properties upon expiration of the shelf life, it is important to pay attention to the date of manufacture and not buy expired goods. To achieve a homogeneous mixture, it is worth using construction mixer.

Prospectors Gypsum

This gypsum plaster in a package of 30 kg has good reviews. The composition includes a special filler that reduces material consumption. Additional components provide good grip. Gypsum does not crack, retains heat and insulates sound.

This mixture can be used for plastering bricks, concrete and foam-gas blocks, and other solid bases. But for the treatment of bathrooms, kitchens and other rooms with high humidity, the solution is not suitable due to the low level of water resistance. It is recommended to finish the finishing at temperatures from +5 to +30 degrees.

Advantages

• It is economically consumed;
• Easy to apply;
• Has elastic properties;
• Provides an even coverage;
• Can be applied by hand.

disadvantages

• High price.

For a quality finish, lay a layer of up to two centimeters. The next layer is applied only after the previous one is completely dry. One package will require up to 20 liters of water.

Unis Teplon

The composition has a great advantage - after drying, it forms a snow-white color. This material is used to plaster walls and ceilings in rooms with a moderate level of humidity.The surface is prepared for painting, wallpapering, tiling. The composition can be applied manually or by machine. No putty is required.

Bathrooms and kitchens are plastered with this mixture, but then it is necessary to apply tiles and carefully grind the tile joints. The solution adheres well to wood, brick, metal, plastic. After a certain time, the material does not shrink, therefore cracks do not appear.

Advantages

• Affordable;
• Plastic consistency;
• Resistant to cracks;
• The plaster does not require putty;
• Forms a smooth surface;
• Snow white color;
• Soundproofed.

disadvantages

• Dries for a long time;
• Poor adhesion.

Since decorative plaster is finely ground, it adheres to the surface evenly and smoothly. When gluing with wallpaper, you do not need to putty the walls, but for painting it is better to additionally process the surface. Otherwise, the painted walls will look like a loft.

Rusean Plaster

The dry mix is ​​sold in 30 kg bags. For preparation, the composition is mixed with water in the correct proportions and beat thoroughly. Special components provide flexibility and easy application.

The mortar is suitable for surfaces in the form of concrete, plasterboard, tongue-and-groove and cement-bonded particle boards, aerated concrete blocks. One kilogram of funds will require 0.58 liters of liquid. The solution grabs within 20 minutes. 8-9 kg of material will be required per square meter of living space.

Advantages

• Forms a smooth surface;
• Easy to apply;
• Provides sound insulation;
• Evenly distributed over the surface;
• Affordable price.

disadvantages

• Not suitable for high humidity.

After applying the composition, it is not necessary to putty the walls. To prevent lumps from forming, it is important to observe the proportions and follow the instructions on the package. The solution is used for interior decoration.

Etalon Story ClimLife

The Etalon gypsum plaster is used to level surfaces in rooms with low humidity levels. The reduced density allows you not to load walls and ceilings, due to which it is held firmly. If necessary, the material is glossy to a high gloss even without additional filler.

This compound is safe for health, it retains heat in the room and protects from extraneous sounds. High vapor permeability creates a favorable microclimate in the apartment. Concrete, aerated concrete, brick, stone surfaces are leveled with a solution.

Advantages

• Retains heat;
• Safe composition;
• Holds firmly;
• Affordable price;
• Sold in many stores.

disadvantages

• Not suitable for wet rooms.

It takes 24 hours for the gypsum mixture to fully harden. Water consumption per kilogram of powder is 0.6 liters. To prevent the material from hardening quickly during work, it must be mixed every five minutes.

Glims TS-70

The diluted solution fits well on foam and aerated concrete, gas silicate block, clinker, clay and silicate bricks, ceramic and expanded clay concrete blocks. Also, the material is applied to a plastered base. The package contains 30 kg of finishing material.

The composition with perlite is applied manually or with a special mechanism. The solution should be used within an hour and a half. One kilogram of powder will require 0.4 liters of water. The mixture is suitable for the treatment of dry and damp rooms. It is applied to a dry, dust-free surface.

Advantages

• Lies flat;
• Does not crack;
• Has heat-saving properties;
• No putty required;
• Holds firmly.

disadvantages

• More expensive than similar compositions.

With a grain size of 1.25 mm, the material lies flat and does not form lumps. It is used not only for repair work, but also for the purpose of creating decorative elements.

Best Wallpaper Adhesives

The best cement plasters

This material is used for rough work — when preparing ceilings, walls and façade surfaces for topcoating.Affordable price allows you to quickly eliminate any shortcomings made during construction. A mixture of cement, sand and chemical components is ideal for any type of decoration outdoors or in an apartment.

Ceresit CT 24 Light

A light plaster mixture is used to repair and level the walls on the inside and outside of buildings. The material is suitable for processing aerated and lightweight concrete, porous ceramic blocks, silicate and ceramic bricks. For application, manual and mechanical methods are used.

The mortar can be applied in a very thick layer up to 30 mm. Most often it is used when it is necessary to level and seal fragile porous bases. The composition is used to treat dry and wet rooms, while cracks are not formed.

Advantages

• Low consumption;
• Has heat insulating properties;
• Resistant to frost;
• Suitable for exterior decoration;
• Suitable for wet rooms.

disadvantages

• Dries for a long time.

The package contains 20 kg of powder mixture. The material is chosen for its reduced consumption and versatility. A bag of funds will require 7-8 liters of liquid.

Weber Vetonit TT40

This good cementitious plaster allows leveling concrete, expanded clay concrete, brick and stone substrates. The material is processed in warm, dry rooms, and it is also suitable for outdoor conditions.

The solution is applied manually or using an apparatus. Finishers like this plaster for its ability to apply a thick layer that can be up to 40 mm. The diluted composition must be used within two hours.

Advantages

• Versatile material;
• Differs in durability;
• Resistant to moisture and frost;
• Can be applied in thick layers;
• Homogeneous mixture.

disadvantages

• Does not catch immediately.

In order for the material to harden well, the plaster is moistened with liquid for two days. This tool is often abandoned only because it is difficult to buy in hardware stores.

Litokol Litoplan Rapid

The composition of the cement thixotropic mortar includes moisture-resistant binders and organic additives. It is they who provide fast setting and drying on walls and ceilings. For a good result, a layer up to 25 mm thick can be applied.

Mixed with water, the composition is easily applied to a vertical surface. The material becomes resistant to compression and bending in just a few hours. It grasps quickly, does not shrink and does not wear out.

Advantages

• Universal remedy;
• Easy to apply;
• Doesn't require professional knowledge;
• Adheres firmly to the surface;
• Dries quickly.

disadvantages

• For interior work;
• High price.

0.2 liters of water is used per kilogram of dry mix. The mixture is applied under decorative filler, plaster, tile. The solution fits well on a concrete, plasterboard, foam-gas concrete base.

The best cement-lime plasters

The lightly filled cementitious binder ensures low consumption. Lime makes the mortar plastic, and the cement protects against moisture and frost. The material is used for exterior and interior wall decoration. Since the plaster shrinks strongly, several layers are applied to the surface. The choice of such mixtures is limited.

Perel TeploRob

Warm winter plaster with gray perlite is sold in 20 kg bags. She is aligned with concrete and brick walls, foam concrete blocks. Also, the material well seals joints and irregularities on a concrete and reinforced concrete slab.

Both dry and wet rooms are suitable for processing. The consumption of the mixture is 12 kg per square meter, provided that a layer is applied up to 10 mm. It is necessary to use the diluted solution within 90 minutes, after which it loses its properties and hardens.

Advantages

• Resistant to moisture;
• For indoor and outdoor use;
• Easy to apply;
• Lies flat;
• Low price.

disadvantages

• Has a grayish tint.

Each new layer is applied only after the first has dried. To obtain the best result, the applied surface is moistened within 24 hours.To ensure reliable adhesion, the mesh is pre-stretched over the facade.

Perfekta FrontPro

Lightweight facade plaster is intended for external and internal use. It is used for machine application on concrete, stone, plasterboard, cement surfaces, aerated concrete blocks, tongue-and-groove slabs. The material is suitable for wet and dry rooms.

The finished solution is used within 120 minutes. 30 kg of funds will require 6-7 liters of water. After drying, the layer is durable and crack-resistant. They cover walls, plinths, and also apply the composition under the tiles and paint.

Advantages

• Universal remedy;
• High strength;
• Low price;
• Low consumption;
• Simple application.

disadvantages

• Sits down quickly.

It is recommended to apply a layer with a thickness of 5 to 40 mm. At 10 mm, the material consumption will be 13 kg per square meter of the room. You can store an unopened bag for a year from the date of manufacture.

What plaster is better to buy

There is no one size fits all solution. Usually plaster is chosen based on its purpose. Gypsum mixture is used to cover walls and ceilings in office and residential premises where there is heating. But at high humidity, this option disappears, in this case, a cement composition is used. Such plaster dries longer and requires reinforcement with a thick layer. Cement-lime plaster helps out when you need to improve the facade or other external surface.

• When asked which gypsum plaster is better for finishing dry rooms, the masters answer immediately. Prospector mix is ​​economical to use and easy to apply.
• Ceresit CT 24 Light is often chosen from cement compositions. It is versatile, suitable for exterior and interior decoration.
• The most popular is the cement-lime plaster Perfekta FrontPro. It is easy to apply and inexpensive.
• Odorless gypsum plaster - Volma Layer;
• A mixture that allows you to achieve a snow-white color of the walls - Unis Teplon.

Before finishing, the walls are cleaned of dirt and dust using a special solvent. If it is difficult to make a choice, it is better to consult a master or seller. He will tell you what to buy and how much.