The best insulation for walls

To build a warm and cozy nest, you need to carefully consider the selection of materials. Insulation is one of the most important elements of construction, since its quality determines how well the room will be protected from the cold. The sound insulation of the room also largely depends on the quality of the selected material. At first glance, it seems that representatives from different companies are no different from each other. But this is not at all the case: in the presented rating, the best heaters for walls are selected, suitable for high-quality construction.

Which insulation company is better for walls?

The rating contains products from both well-known manufacturers among builders and from little-known companies. To better navigate the brands, you should take the time to get to know each of them:

• Penoplex Is a Russian company founded in 1998. One of the country's largest manufacturers of polymer materials for decoration and interior decoration. All procedures for the production of materials are carried out at our own production sites.
• Tsmceramic Is an international group of companies. Known for its innovations in energy saving and protective coatings for all surfaces. The main direction of production is thermal insulation materials that meet advanced standards.
• Isover - is part of a French concern with a long history. It is world famous as it includes some of the largest industrial enterprises in the world. The production of thermal insulation materials began in 1937.
• Izovol - a domestic manufacturer that appeared relatively recently. The company's products are of high quality, confirmed by international certificates.
• Green Board - belongs to LLC "Construction Innovations" and is the only manufacturer of fiberboard materials in Russia and the CIS. The highlight of the company is the environmental friendliness of products, achieved by a special manufacturing technology.
• Heatknauf Is an international company founded in Germany in 1932. A significant part of the brand's manufacturing enterprises are located in the CIS countries. Long-term development has allowed the organization to become one of the leading in the whole world.
• Ursa occupies a leading position among European manufacturers of building materials. Offers technological solutions for heat and sound insulation. The brand's products are used in all areas due to a unique set of characteristics that make it optimal in various situations.
• Armor Is a Russian company that produces liquid insulation for walls. The products manufactured by her have practically no analogues. The convenience and efficiency of the materials allowed the brand to quickly gain recognition and fame.
• TechnoNicol - a domestic manufacturer of materials for roofing, hydro and thermal insulation. Founded in 1992. The company's factories are located in Russia, Belarus, European countries. One of the five largest European manufacturers of insulation materials.
• Izospan - a pioneer in the production of steam and moisture-proof materials. The company's products have been produced since 2001. During its existence, the company has become one of the most famous in the CIS.Products are manufactured on our own production base: all stages are controlled by the company's specialists, which ensures high quality materials.
• ShelterEkoStroy - produces thermal insulation without the use of carcinogens. This is the first Russian brand to manufacture such products. Due to the ease of installation and comfort during operation, the company's products quickly became popular in the CIS countries.
• Euroblock Is a Russian company founded in 1995. The brand's products are constantly evolving: specialists make materials not only of higher quality, but also more convenient to work with. The emphasis is on the functionality of the insulation, which is constantly being expanded.

Rating of insulation for walls

The rating of wall insulation was formed through a practical study of all materials, an analysis of the opinions of experts professionally engaged in construction, and people who used thermal insulation in the construction of their own home. As a result of the complex work of experts from expertpro.techinfus.com/en/, it turned out to determine the 12 best insulation materials for walls, optimal for use in various types of buildings. The entire rating is divided into 2 large blocks. The first includes products intended for finishing the external coating of buildings, the second - for interior decoration.

The focus is on the characteristics of the materials. The selection includes only products that have everything you need for comfortable use in construction. The analysis focused on how the material manifests itself in real conditions and protects the room from the adverse effects of the climate. The list of main criteria is as follows:

• Sheet thickness;
• Leaf area;
• Spheres of application;
• Minimum and maximum operating temperatures;
• Coefficient of thermal conductivity.

Also, when considering the nominees, the price was taken into account, and how much it relates to the quality of the materials.

The best plasters

The best insulation for walls outside

Insulation for siding and other decorative coating is presented in this category. All materials are not fundamentally different from each other, but each has unique features that make it the best in certain situations. There is no absolute leader in positions: each insulation model has its own pros and cons. To compile the selection, the expertpro.techinfus.com/en/ team studied dozens of the most famous models of thermal insulation. The list of solutions for exterior finishing includes only 6 options that stand out against the general background.

Penoplex Comfort

Extruded polystyrene foam is used for the production of the product, which is found in many other models. The length of one sheet is 1185 mm, width - 585 mm, thickness - 50 mm, area - 0.7 m². It is used for wall and roof insulation. Suitable for interior work, but in this case it is inferior to other analogues in efficiency. Sheet form - grooved plate.

The lowest operating temperature is -50 degrees, the highest is +75 degrees. The thermal conductivity coefficient is 0.033 W / (m-K). The degree of flammability of the material is G4. The model is resistant to mold and mildew.

Advantages

• Low price;
• High strength and durability;
• High-quality sound and heat insulating properties;
• Convenient installation;
• Good physical characteristics (especially flexibility).

disadvantages

• Low resistance to high temperatures.

Periodically, there is an opinion that such materials are harmful to health. However, in the reviews of the model in question, there are no complaints that the insulation negatively affects the air quality in the room and causes an allergic reaction.

Tsmceramic

It is a liquid thermal insulation. It is used for finishing complex facades. The declared service life of the material is at least 30 years. The temperature regime ranges from -60 to +260 degrees. Application to walls is carried out in a thin layer and saves valuable space.Insulation adheres to concrete, plastic, metal and wood surfaces.

The material is used in exterior decoration, as it is not exposed to the negative effects of moisture, ultraviolet radiation, dampness, mold. Can be used in combination with classic thermal insulation to improve the effect.

Advantages

• Convenient application;
• Conservation of useful space;
• Minimum load on the walls and foundation of the building;
• Wide operating temperature range;
• Economical consumption.

disadvantages

• High price.

Customers note that thanks to the convenience of wall coating, an effective result can be achieved even on surfaces with complex shapes. The material has a high cost, but it matches its quality.

Isover Warm House

The thermal insulation is made of mineral wool and is supplied in packs of 14 panels. The length of one sheet is 1170 mm, the width is 610 mm, and the thickness is 50 mm. The material is elastic, which ensures reliable fastening in the frame without the use of additional fasteners. Adheres tightly to the wall surface for complete insulation. The material is not subject to combustion.

In the manufacture, environmentally friendly materials are used, which makes it possible to use the material for insulation inside the building (the efficiency in this case is less than that of many other options). The sheets are pre-cut: working with them does not require additional effort.

Advantages

• Simple installation into the frame without the use of fasteners;
• Safety for health and the environment;
• Non-flammable material;
• Cotton wool is immune to mold, fungi;
• Good sound insulation;
• Affordable price.

disadvantages

• When installing, you must use protection.

In general, the option under consideration combines a low price and a list of advantages inherent in high-quality thermal insulation. The product provides reliable protection against adverse environmental influences and does not cause difficulties during installation.

Izovol Izobel

The material is stone wool in slabs. One package contains 4 units. The dimensions of one slab are as follows: height - 1000 mm, width - 600 mm, thickness - 100 mm. It can be seen that the slabs are rather large and thick. For their installation, you will need free space between the wall and the outer covering. In view of its dimensional indicators, the considered insulation is mainly used in the decoration of walls from the outside. The leaf area is 0.6 m². The thermal conductivity coefficient is 0.036 W / (m-K). The product is susceptible to fire and is not susceptible to mold and mildew.

Advantages

• High resistance to thermal stress;
• Environmental Safety;
• Ease of installation;
• The material does not crumble when cutting;
• Good sound isolation.

disadvantages

• The material absorbs moisture (additional vapor barrier is required).

Considering thermal insulation, it is optimal for finishing massive walls, an increase in the thickness of which will not affect the appearance of the building. It is also good in cases when it is necessary to thicken the walls and leave no empty space in them. It is simple and effective to use, but requires the cost of an additional layer of vapor barrier coating.

Fiberboard GB-600

A significant property of the thermal insulation of this brand is maximum environmental safety. It does not emit dust, does not cause allergic reactions, itching on contact with open areas of the body. The thickness of one sheet is 25 mm. The sheets are quite thin and resilient: they can be bent and adjusted to the shape of the building walls.

Thermal conductivity coefficient - 0.095 W / (m-K). The material is not susceptible to fire. A special set of raw materials used in the manufacture provides a snug fit to the surface and reliable protection from cold and drafts. Suitable as the main insulation for the walls of a frame house, used outside.

Advantages

• Plates are compact and do not take up much space;
• Working with the material does not require protection;
• High flexibility allows you to adjust the sheets to complex wall shapes;
• Reliable resistance to negative environmental factors.

disadvantages

• Heat retention is slightly worse than some peers.

Fiberboard GB-600 is the choice for people who value environmentally friendly and easy-to-use building materials. Insulation shows decent results in any climate, keeping rooms warm and comfortable.

Heatknauf TS 037 Aquastatik

The delivery set of the insulation model is a set of 8 sheets with the following dimensions: length - 1230 mm, width - 610 mm, thickness - 100 mm. The sheets are made of mineral wool and are suitable for finishing concrete, brick, wood, aerated concrete walls. Wall and roof mounted. Installation requires a lot of free space.

The thermal conductivity is 0.00386 W / (m-K). The material belongs to the class of non-flammable. The set of raw materials used in the manufacture provides full resistance to dampness, mold, fungi.

Advantages

• High thermal insulation rate;
• Good sound insulation, ensuring silence even in large cities;
• Versatility in use;
• Resistance to fire, moisture, drafts;
• Convenient installation without a lot of dust.

disadvantages

• Not found.

Thermal insulation provides good protection of the room from cold and dampness. The material is durable and does not deteriorate from external factors. Wall mounting is straightforward. The only controversial point is the thickness of one sheet, which should be taken into account when planning finishing work.

The best insulation for walls inside

The best heaters for walls inside the house differ from external heaters in thickness so that the area of ​​the room is not cut. The models were selected by the expertpro.techinfus.com/en/ team based on the results of numerous tests and analysis of reviews, in which they stood out from their peers.

Ursa XPS N-III-G4

The material is made of extruded polystyrene foam, in the form of grooved plates. The length of one sheet is 1250 mm, width - 600 mm, thickness - 30 mm. The area of ​​each slab is 0.8 m². The structure of the boards makes them suitable for indoor and outdoor use. Insulation is optimal for covering floors, walls and ceilings.

The thermal conductivity is 0.032 W / (m-K). The material is flammable and belongs to the G4 class. Operating temperature range: -50 to +75 degrees. The model can be used to insulate any premises: it is not susceptible to moisture, mold, damage from insects, rodents.

Advantages

• Affordable price;
• Lack of freons in the composition;
• Lightweight and good flexibility;
• Ease of installation;
• A large number of areas of application.

disadvantages

• Flammability: not recommended for rooms with increased fire hazard.

The presented material significantly improves the temperature conditions inside any premises. It reliably protects rooms from the adverse effects of the climate.

The best adhesives for wood

Armor Wall

The product is a liquid type insulation, sold in buckets of 5, 10, 20 liters. The liquid is applied to the surface with a spray gun. The consistency of the material makes it suitable for indoor use with brick, concrete, wood walls, ceilings and floors. Possesses high vapor permeability, protects surfaces from the negative effects of moisture.

The maximum operating temperature is +80 degrees, the minimum is -60 degrees. Thermal insulation is presented in two versions with different flammability: non-flammable and class G1 (low flammability). Thermal conductivity is 0.0012 W / (m-K).

Advantages

• Saving work space;
• Ease of application to the insulated surface;
• Versatility;
• High heat retention and moisture resistance;
• Long time of active service.

disadvantages

• High price;
• Fast consumption.

The option under consideration is suitable for finishing surfaces with a complex shape and a large number of corners. The spray can effectively fill hard-to-reach areas. High quality determines the considerable cost of the material. Costs are increased by high fluid consumption per 1 m².

TechnoNicole Rocklight

Insulation is made from mineral wool. It looks like a slab 1200 mm high, 600 mm wide, 100 mm thick. One package contains 4 units. The option under consideration is the optimal insulation for brick walls. The high density and thickness of the material allow you to completely protect the room from drafts and cold.

The thermal conductivity coefficient is 0.038 W / (m-K). Thermal insulation belongs to the class of non-combustible. Material properties provide good sound insulation. The maximum permissible moisture content is 0.5% of the total mass.

Advantages

• Low price;
• Good resistance to cold and drafts;
• Ease of installation;
• Heat and sound insulation;
• No drawdowns.

disadvantages

• Low resistance to moisture and the need for additional vapor barrier.

In general, TechnoNicol Rocklight is one of the best options in terms of matching quality to price. It provides reliable insulation of the room and does not let cold and moisture into it. The material does not burn, does not cause allergic reactions, which makes it convenient for indoor use.

Izospan FD Proff

Izospan FD Proff is a vapor barrier that reflects heat. It is a roll. The total length of the coating in a roll is 43 m, the width is 1600 mm. The density of the material is 132 g / m². The cover is made of polypropylene. The comfortable shape of the material makes it practical for working with difficult surfaces. For tightness, a reliable fastening of the canvas to the wall is required.

The material is completely vapor and waterproof. The minimum application temperature is -60 degrees, the maximum is +80. This model is the optimal insulation for interior walls, as it has a small thickness and practically does not take up useful space.

Advantages

• High degree of room insulation from moisture;
• Good heat reflecting properties;
• Compactness;
• Wide operating temperature range;
• No harm to health.

disadvantages

• The high price of one roll.

One roll of the material in question has a solid cost, but it corresponds to its quality. The material is extremely simple and easy to use and has a list of advantages that positively distinguish it from its analogues.

Shelter EcoStroy Master

The product belongs to the classic type of tile insulation. It is made of polyester organic fiber, without the use of glue and substances harmful to health. The length of one slab is 900 mm, the width is 600 mm, and the thickness is 50 mm. One package contains 6 units. The type of application is internal. Optimal for residential buildings and apartments. Installed on concrete, foam block, brick, wood.

Thermal conductivity coefficient - 0.033 W / (m-K). The material has a dense structure that provides protection from drafts, dampness and sounds. Plates are immune to mechanical damage: insects and rodents cannot spoil them.

Advantages

• High quality heat retention and anti-cold;
• Isolation from external sounds;
• The material is not subject to destruction, subsidence, negative effects of moisture;
• High density and strength;
• Health safety.

disadvantages

• Supplied in bulky packages;
• Sometimes there are areas with uneven density.

Shelter EcoStroy Master is an effective and affordable solution for the arrangement of residential buildings. The use of environmentally friendly raw materials in production makes the material suitable for allergy sufferers and asthmatics. The set of technical characteristics is balanced, providing warmth and comfort in the room.

Euroblock PenoHome

PenoHome universal insulation looks like a sheet laminated material.In the manufacture, polymers are used (for some layers) and polyethylene foam with different densities. The material has heat and sound insulating properties, it resists moisture well. Sold in packs of 8.

1 sheet has the following characteristics: height - 1000 mm, width - 600 mm, thickness - 50 mm. Thermal conductivity coefficient - 0.048 W / (m-K). The minimum and maximum operating temperatures are -60 and +90 degrees, respectively. The flammability group is G3, which is why the Euroblock PenoHome is not the best insulation for wooden walls.

Advantages

• Sophisticated, multi-layer structure for maximum thermal insulation;
• High material density;
• Good performance against moisture and external noise;
• Convenient structure for installation.

disadvantages

• The material is unreliable when used in wooden structures;
• Itching during installation: body protection should be used.

In the production of the material, the emphasis is on the maximum efficiency of heat, sound, waterproofing. The composition of raw materials includes substances that can cause an allergic reaction in some people. The model is well suited for use in extremely cold or humid climates.

What insulation for walls is better to buy

A preliminary analysis of the area in which it will be applied will help to choose the right insulation. The primary criterion is the type of insulation: external or internal. Further, the technical condition of the building is determined, the walls of which will be strengthened. If there are gaps in them, it is recommended to give preference to less dense, but more flexible materials. If the walls are thin, thick, heat-retaining options will do. For complex structures, a liquid insulation is recommended, which is easily applied to the walls with a spray, but you should not expect high heat protection from it.

A little about the choice:

• Penoplex Comfort is a balanced option for exterior decoration of buildings in cold and humid climates with a low price;
• Tsmceramic is a solution for external insulation of facades with a complex structure and many places that are difficult to insulate with classic sheets;
• Isover Warm House is an inexpensive and easy-to-install material that is suitable for ensuring adequate protection of the premises from cold and noise from the street;
• Izovol Izobel is suitable for cases when the walls of the building are thickened from the outside, as it is voluminous and completely fills a large space;
• Fiberboard GB-600 - an environmentally friendly material that shows itself perfectly in the decoration of balconies and loggias;
• Teploknauf TS 037 Aquastatik is a thick material for exterior finishing that reliably protects the building from dampness: optimal in humid climates;
• Ursa XPS N-III-G4 is a durable insulation that works well in the interior decoration of utility rooms that suffer from insect and rodent damage;
• Bronya Stena is a liquid-type insulation, convenient for working with complex structures that need reliable protection from cold and moisture;
• TechnoNicol Rocklight is a high-quality option that completely neutralizes drafts in the room and does not release heat from it;
• Izospan FD Proff - is a thin vapor barrier that reflects heat: ensures the absence of dampness, improves the temperature conditions in the room;
• Shelter EcoStroy Master is a classic tile insulation for walls inside the country house, reliably protecting rarely visited buildings from the adverse effects of the external environment;
• Euroblock PenoHome is a versatile laminate that does not release heat even in extreme cold conditions.

The rating presents the best models of heaters, each of which performs well in various conditions. The buyer can only choose the best option for himself.