The best pumps for irrigation
Without regular irrigation of the garden, it is unlikely that it will be possible to grow a decent harvest. However, it is difficult, time consuming and inconvenient to carry out it manually. You can avoid this by choosing the best pump for irrigation from a river, barrel, well, well. The ranking includes submersible and surface models that were selected as a result of our own tests and analysis of user reviews.
Content
Irrigation pumps rating
Before writing the TOP, consultations were held with sellers, and a lot of reviews from buyers and gardeners were studied. The analysis took into account the following characteristics:
- Type - surface or submersible;
- Mechanism - centrifugal or vibration;
- Installation - horizontal or vertical;
- Manufacturing materials;
- Weight and dimensions;
- Suction depth;
- Power;
- Liquid temperature range;
- Water quality - clean or polluted;
- Mains voltage;
- Bandwidth;
- Maximum head;
- Operating pressure;
- Splash, drip and particulate protection;
- Heat resistance;
- Noise level.
The selection also focused on safety, versatility, reliability, usability and value for money. After a detailed analysis and comparison of all parameters, 10 winners were selected out of more than 30 nominees.
Surface Irrigation Pumps
Such models are mounted on the ground near the source. They are suitable for use with relatively clean water, free of solid particles and organic debris. They are used for watering garden plots and water supply of houses. These devices are easy to install and move, have low power and affordable cost. After testing 10 nominees, 3 winners were selected based on the best performance and safety.
ESPA Aspri 25 5M
The Spanish model of the surface type "ESPA Aspri 25 5M" is suitable for watering a vegetable garden and a garden, increasing the pressure in the system and for supplying water to the house. Clean and slightly contaminated liquid (with a cutting attachment) can be supplied from a pond, storage tank, water supply and well. With an average power of 1.7 kW, the unit has a high throughput - 7.2 cubic meters. m / h and gives a good head - 56 m. It uses a centrifugal mechanism with a working pressure of 6 bar, which provides the greatest suction depth - 9 m.
The minimum temperature of the pumped liquid in the water pump for watering the garden is + 4 ° C, the maximum - up to + 35 ° C. It is distinguished by high strength indicators, since stainless steel, aluminum and reinforced plastic were used for the manufacture. An asynchronous two-pole motor with a rated speed of 2900 rpm and a soft start is installed here. It is cooled by a fan built into the shaft, has a high thermal insulation class of the windings (F) and is IP 44 protected against drops, splashes and the ingress of solid objects.
Advantages:
- Low noise level - 58 dB;
- Wide range of maintained liquid temperature;
- Discharge and suction nozzles are made of cast iron;
- The warranty period is 3 years;
- Self-priming valve;
- Rapid rise of liquid - about 3 minutes.
Disadvantages:
- No cable included.
Manufacturers equipped the shaft with a graffite-steatite end seal, thereby ensuring the engine can operate at high temperatures and high pressures, as well as minimizing the risk of fluid leakage.
Whirlwind PN-370
With an average power of 370 W and modest dimensions (30.1 x 14.5 x 16.2 cm), this surface unit is capable of pumping water from a depth of up to 9 m and lifting it to a height of 30 m. It has a capacity of 2.76 cubic meters. m / h. For secure installation during operation, the design provides a solid flat base. The unit supplies fluid from a well, well, pond, pool and various storage tanks.
The "Vortex PN-370" model combines the practicality of self-priming and the advantages of centrifugal devices, thanks to the built-in ejector with the "Venturi" pipe system. Also, its presence allows you to pump liquid containing solid particles, the concentration of which should not exceed 150 g / m3... For the manufacture of the device body, cast iron was used, which reliably protects all internal components from external influences and allows pumping in a temperature range of +1 to 50 ° C. The optimal weight of the model (5.4 kg) makes it easy to carry.
Advantages:
- Low energy consumption;
- Budget cost;
- Motor overload protection;
- Compactness;
- Reliable construction.
Disadvantages:
- Paint quality not very good.
Quattro Elementi Giardino 401 Ci
The surface irrigation unit "Quattro Elementi Giardino 401 Ci" has a compact size of 26 x 13 x 16 cm and a low weight of 4.6 kg. It is ideal for transportation and handling. The body is made of cast iron, which provides corrosion protection, noise reduction during operation and a long service life. In its lower part 2 legs with holes are built in, which contribute to a firm installation of the unit on the surface. The suction liquid temperature must be between +5 and + 30 ° C.
This representative of the best irrigation pumps uses a centrifugal principle of operation with a single-stage suction system. An electric motor with a rated power of 400 W is installed here. It is sufficient to provide a throughput of 2.1 cubic meters per hour at a pressure of 1.5-3 bar, as well as a maximum head of 32 m and a depth of 8 m. This water unit is suitable for organizing an irrigation system with clean water in garden plots.
Advantages:
- Low noise level - 75 dB;
- Protection class IP54;
- Ease of use;
- High build quality;
- Ergonomics.
Disadvantages:
- The warranty period is 1 year.
In order to avoid damage to the device, be sure to check the presence of contents in the pump and suction pipe before switching it on. Before the end of the season, it must be drained, as the cast iron can rust and the impeller of the nose can jam.
Barrel Irrigation Pumps
Such models are suitable for pumping liquids from tanks with a depth of no more than 1.8 m. They are fixed on the side of the tank and connected to the network. These units are compact, lightweight and quiet. The advantage of these pumps is the ability to dilute the necessary fertilizers and chemicals in a barrel before watering. expertpro.techinfus.com/en/ editors chose 1 winner out of 5 nominees based on the best performance and reliability.
Gardena 2000/2 Li-18
The wireless submersible model "Gardena 2000/2 Li-18" is powered by a lithium-ion battery with a capacity of 18 V (2.6 Ah) with an LED display showing the charge. There is also a control panel with a power button and 3-level power adjustment: 1100, 1700 or 2000 l / h. Depending on the selected mode, the operating time will be 15, 30 or 60 minutes at a maximum pressure of 2, 1.3 or 0.4 bar. The maximum suction depth is 1.8 m, the minimum is 5 cm.
The design of the irrigation device provides the ability to connect hoses of 19 and 33 mm.It can be used to pump out the contents of a pool, flooded boat and other medium capacity with a maximum head of 20 m. It also supplies liquid to the shower. The highest temperature is maintained at 35 ° C. The device is lightweight (2.5 kg) and is equipped with an adjustable curved handle. The advantage of the model is the built-in filtration system.
Advantages:
- Presence of protection against blocking of the impeller of the nose;
- Versatility;
- Dry run protection function;
- Unpretentious maintenance;
- Charging time is 4 hours.
Disadvantages:
- No hoses included.
The battery supplied with the barrel pump is suitable for all Gardena appliances that support the HeartBeat system.
Drainage pumps for irrigation
These models do an excellent job of pumping contaminated water from pools, basements, ponds, cesspools and swamps. Their advantage is a rotor-mounted filter or chopper. Unlike a garden pump for watering from a barrel, this type allows you to supply water with branches, leaves, silt and other debris, which later becomes a liquid organic fertilizer for the beds. Drainage units are economical to use and inexpensive. Initially, 10 applicants participated in the testing. After a detailed study and comparison of their characteristics, the 3 best models were selected.
Bison NPG-M1-400
Drainage submersible unit "Zubr NPG-M1-400" is equipped with 400 W electric motors powered by 220 V. With a small head pressure of 5 m, it provides a high productivity of 7.5 cubic meters. m / hour and an optimal immersion depth of 7 m. The device is suitable for draining flooded rooms, cleaning wells and filling tanks from ponds. Thanks to the installed filter, you can pump both clean and dirty water with a particle size of up to 3.5 cm.
The model provides automatic on and off using a float that controls the water level. It is equipped with a thermal fuse to prevent overheating of the motor and is protected against dust, solid objects and moisture, class IP 68. The device case is highly durable. For its manufacture, glass fiber reinforced hygienic plastic was used. The kit includes a universal hose connector.
Advantages:
- Small weight - 3 kg;
- Compact dimensions - 19 x 9 x 16 cm;
- Power cord length - 7 m;
- Warranty period - 5 years;
- Low price.
Disadvantages:
- Hose connection not provided предусмотрено.
The owners of the Zubr NPG-M1-400 drainage unit note the benefits of the built-in plastic handle. With its help it is convenient to carry and immerse the device.
Jileks Drainer 110/8
This submersible pump pumps ground water, rainwater and waste water from 1 to 35 ° C. The size of the passed particles must not exceed 5 mm. It is suitable for supplying clean liquid from ponds, wells and storage tanks. It uses a centrifugal impeller. With a power consumption of 210 W, the unit provides a capacity of 6.6 cubic meters. m / hour, as well as pressure and depth of 8 m.
The model "Dzhileks Drenazhnik 110/8" is equipped with protection against dry running and an automatic water level control system using a float. The single-phase electric motor of the device is not subject to external damage due to the hermetically sealed housing. Its stator has a working and starting winding with a thermal protector that turns off the engine when it overheats. The included universal outlet fitting accepts 1.0, 1.25 and 1.75 inch hoses.
Advantages:
- Electrical protection class IP 68;
- Optimal weight - 4.8 kg;
- Optimal dimensions for mounting - 17 x 37.7 x 22 cm;
- Versatility;
- Easy to maintain.
Disadvantages:
- The shelf life is 12 months.
Buyers note the convenient length of the power cord (5 m) of the device, its good performance and low noise during operation.
Karcher BP 1 Barrel Set
Buy this watering pump should be those who wish to pump water from tanks of almost any configuration.The Karcher BP 1 Barrel Set is equipped with a 400 W electric motor. It provides a vertical water rise of 11 m (1.1 bar) with a maximum immersion depth of 7 m and a capacity of 3800 l / h. A pre-filter is installed here, which protects the system from dirt and small particles up to 1 mm. The design provides a flexible mount on the handle, adjustable in height.
The advantage of the device is its complete set. It has a 15m adjustable hose, 2 universal connectors and a spray gun. The pump is equipped with a float switch for automatic adjustment of the water level. Its low weight (4.6 kg) and compact dimensions (17 x 52 x 13.5 cm) make it easy to transport. The maximum temperature of the pumped liquid is allowed up to 35 ° C.
Advantages:
- Built-in protection against switching on without liquid;
- The optimal cord length is 10 m;
- Convenient carry handle;
- Economical energy consumption;
- Reliable build quality.
Disadvantages:
- The bottom filter is not very securely installed.
Owners of the device praise it for its low power consumption and quiet noise during the work process (44 dB).
Well Irrigation Pumps
These devices do a good job of providing water supply to small private houses. They are used to draw clean water from wells, barrels and wells. The presence of solid particles will damage the devices. The advantage of these pumps is their large immersion depth and good head. Experts expertpro.techinfus.com/en/ with special attention studied the characteristics of each of the 10 models reviewed. After comparing them, 3 winners were selected.
Livgidromash Malysh-M BV 0.12-40 10m
Well pump "Livgidromash Malysh-M BV 0.12-40 10m" submersible type perfectly copes with water supply from wells, wells and ponds. He arranges the water supply for a small house. To avoid breakage, the water supply must be clean with a maximum temperature of 35 ° C. It uses a vibrating mechanism that ensures minimum energy consumption (240 W) and good performance (1.5 cubic meters / hour).
The maximum immersion depth and head of the irrigation unit are 3 and 60 m. The absence of rotating parts and the use of an aluminum-silicon alloy provide reliable protection and extend its service life. The tightness of the dismountable parts of the device keeps the bolts securely tightened. Due to the upper intake of water, the engine of the device is protected from overheating and the possibility of suction of mechanical impurities.
Advantages:
- Small weight - 3.4 kg;
- Compact dimensions - 9.9 x 25.5 cm;
- Easy installation;
- No special maintenance required;
- IPX8 protection class;
- The optimum length of the power cord is 10 m.
Disadvantages:
- No dry run protection.
With a rubber backing, the unit can operate both vertically and horizontally.
Grundfos SBA 3-35 A
The model "Grundfos SBA 3-35 A" with a single-stage suction system is lowered to a depth of 10 m. The power of the 800 W electric motor at a speed of 2800 rpm provides a throughput of 3000 l / h and a liquid lift of 35 m. This pump is used for watering the garden from tanks, clean ponds, as well as for pumping it at temperatures up to 40 ° C from wells and wells. It regulates the pressure in the water supply network and provides a liquid supply for private small houses.
This unit is protected against overheating and is equipped with a flow switch. It is equipped with a 1 mm perforated stainless steel floating suction filter with a non-return valve. It draws in clean liquid that is below the water mirror. High protection of internal elements is ensured by a robust housing made of stainless steel and composite materials that are not prone to corrosion.
Advantages:
- Long cable - 15 m;
- Average dimensions - 15 x 52.8 cm;
- Small weight - 10 kg;
- Quiet operation - 50 dB;
- Protection against operation in the absence of liquid.
Disadvantages:
- High price.
In the reviews, product owners write a lot of positive reviews about its quiet operation and the presence of a suction floating filter.
Technopribor Rucheek-1, 10 m
The model "Technopribor Rucheek-1, 10 m (225 W)" with a vibration mechanism is equipped with a 225 W motor, which provides a water rise of 60 m. When lowered to a depth of 1 m, its productivity is 1050 l / h. Using the maximum capacity of 60 m, the volume of liquid supplied is reduced to 432 l / h. The unit has proven itself to be excellent in taking clean water from ponds, wells, wells and tanks.
The irrigation pump has no rubbing surfaces or rotating parts, so it features smooth, long-term operation. The device is equipped with a thermal relay that protects the motor from overheating. An overhead fence is used here, this contributes to the constant cooling of the electromagnet system. For the convenience of using the device, a 10 m long cord is provided.
Advantages:
- Budget cost;
- Unpretentious maintenance;
- Small weight - 3.6 kg;
- Compact dimensions - 10 x 28 cm;
- The best indicator of pressure in the rating.
Disadvantages:
- Counterfeits are common.
Customers are delighted with the high head that this unit provides.
How to choose a pump for irrigation
When choosing, you need to pay attention to the type of device, the quality of the water required, the indicators of the maximum pressure, throughput and immersion depth.
A type
Which pump is best for irrigation depends on the pump type. Surface devices operate with relatively clean water and are surface mounted. They are suitable for those who wish to provide home water supply and irrigation of the site. For watering from a barrel and a well, it is better to choose highly specialized models. The former have a low immersion depth, light weight and are equipped with a filter. The latter are suitable for work with clean water and have a greater immersion depth. Drainage models will perfectly cope with pumping out contaminated liquid.
Water quality
Pumps operating with contaminated water are equipped with a filter or grinder. Therefore, they are suitable for pumping out of swamps, cesspools, muddy pools, ponds and containers with impurities in the form of sand, twigs, leaves, silt and other debris. If the object for the fence is not contaminated, then you can safely buy a model that works only with clean water.
Maximum head
If it is necessary to irrigate an area up to 300 m, then models with a maximum pressure of up to 30 m are suitable.When the size of the territory is from 300 to 1000 m, it is better to opt for devices with an indicator of 30-100 m.
Bandwidth
For a specific case, it is necessary to carry out a calculation by multiplying the area by the desired volume of water. For irrigation of beds in hot weather, experts recommend using about 5 liters per 1 sq. m. Based on this, for watering a vegetable garden with an area of 600 sq. m. there will be enough engine power of 1.0-1.5 kW, providing a throughput of 2500-3000 l / h.
Immersion depth
In the case of purchasing a pump for pumping water from shallow sources (shallow well, large barrel), models with a submersion index of up to 9 m are suitable. Usually, surface devices are preferred. For supply from wells, ponds and other deep sources, attention should be paid to devices that maintain a depth of more than 10-20 m. Submersible devices meet these criteria.
Which irrigation pump is better
Surface pumps operate with clean water. They are easy to use, reliable and unpretentious. Barrel irrigation devices allow the use of water with added chemicals and fertilizer. Drainage devices are distinguished by their ability to pass contaminated liquid. The advantage of pumps for irrigation from a well is their high head and immersion depth.
Which pump to choose for watering a garden or organizing water supply largely depends on its purpose and throughput:
- For water supply at home and irrigation of beds, it is better to purchase "ESPA Aspri 25 5M" with a high capacity of 7.2 cubic meters. m / h.
- If irrigation of the plots requires units with a lower capacity, then you should buy "Vortex PN-370" (2.76 cubic meters per hour) or "Quattro Elementi Giardino 401 Ci" (2.1 cubic meters per hour).
- The “Gardena 2000/2 Li-18” (2000 l / h) with battery power will perfectly cope with the water supply from the barrel.
- If working with polluted water requires increased productivity, pay attention to Zubr NPG-M1-400 (7.5 cubic meters per hour) and Dzhileks Drenazhnik 110/8 (6.6 cubic meters per hour).
- If you wish to buy a device for the suction of dirty water with a lower throughput, you should purchase the Karcher BP 1 Barrel Set (3.8 cubic meters per hour).
- For water intake from a well, "Livgidromash Malysh-M BV 0.12-40 10m" with an average productivity of 1.5 sq. m / h.
- If the task is to water a large area from a well, then the best option would be "Grundfos SBA 3-35 A" (3.0 cu. H).
- For shallow wells, Technopribor Rucheek-1 is suitable.
The rating contains the highest quality models, distinguished by their versatility, safety and high performance.
Comments